How to use wall-mounted boiler and floor heating
With the coming of winter, wall-mounted boiler floor heating has become the preferred heating method for many families because of its high efficiency, energy saving, comfort and warmth. However, how to correctly use wall-mounted boiler floor heating to achieve the best results and extend the life of the equipment is a concern of many users. This article will combine the hot topics and hot content on the Internet in the past 10 days to give you a detailed introduction to the use of wall-mounted boilers and floor heating.
1. Basic principles of wall-mounted boiler and floor heating
Wall-mounted boiler floor heating is a way to achieve indoor heating by heating water through a wall-mounted boiler and then transporting the hot water to the floor heating system through pipes. The core equipment is the wall-mounted boiler, and the floor heating system includes water distributors, pipes, thermostats and other components.
2. The correct way to use wall-mounted boiler and floor heating
1.Inspection before starting up
Before using wall-mounted boiler floor heating, the following checks need to be carried out:
| Check items | Operating Instructions |
|---|---|
| water pressure | Make sure the water pressure is between 1-2bar. If it is too low, you need to add water; if it is too high, you need to drain it. |
| gas supply | Make sure the gas valve is open and the gas meter has sufficient balance. |
| power supply | The wall-mounted boiler needs to be connected to the power supply and the plug must be secure. |
2.Boot operation
The steps to start up the wall-hung boiler are as follows:
| steps | Operating Instructions |
|---|---|
| 1 | Turn on the power switch of the wall-hung boiler. |
| 2 | Press the power on button and wait for the wall-hung boiler self-test to complete. |
| 3 | Set the heating mode and adjust the temperature to the desired value (usually 50-60℃). |
3.temperature regulation
The following points should be noted when adjusting the temperature of floor heating:
| Adjustment items | Suggestions |
|---|---|
| indoor temperature | It is recommended to set it at 18-22℃, too high will increase energy consumption. |
| water temperature | The recommended floor heating water temperature is 50-60°C. If it is too high, it may damage the pipes. |
| Divider adjustment | The flow rate of each loop can be adjusted according to the needs of the room. |
3. Energy-saving techniques for wall-mounted boiler and floor heating
1.Set the temperature appropriately
When no one is around during the day, the temperature can be appropriately lowered (such as 16°C), and then returned to a comfortable temperature at night, which can save 10%-15% of energy consumption.
2.Regular maintenance
Wall-mounted boilers and floor heating systems require regular maintenance to increase efficiency and extend life:
| maintenance items | cycle |
|---|---|
| Clean filter | 1-2 times a year |
| Check water pressure | 1 time per month |
| Professional maintenance | Once every 2-3 years |
3.Avoid frequent switching
The energy consumption of the floor heating system is high when it is started. Frequent switching on and off will increase energy consumption. It is recommended to turn off the system when leaving home for a long time.
4. Common problems and solutions
1.Wall mounted boiler does not start
Possible causes and solutions:
| Reason | Solution |
|---|---|
| Water pressure is too low | Replenish water to 1-2bar. |
| Gas supply interruption | Check the gas valve and gas meter. |
| power failure | Check the power plug and switch. |
2.Is the floor warm or not?
Possible causes and solutions:
| Reason | Solution |
|---|---|
| clogged pipes | Clean the filter or contact a professional. |
| Improperly adjusted water distributor | Adjust the flow rate of each loop. |
| Water temperature set too low | Properly increase the water temperature of the wall-mounted boiler. |
5. Summary
The correct use of wall-mounted boiler and floor heating can not only improve comfort, but also effectively save energy and extend the life of the equipment. With regular inspections, proper temperature settings, and regular maintenance, you can enjoy warm winters with ease. If you encounter a problem that cannot be solved, it is recommended to contact a professional for maintenance in time.
I hope this article can help you better use the wall-mounted floor heating system and spend a warm and comfortable winter!
check the details
check the details
en
